State-of-the-Art Measurement Analysis Software, Training and Consulting Services
Celebrating over 30 YRS of Excellence and Innovation 1987-2017



 Products  Software AccuracyRatio 1.6 Summary Info Literature References


AccuracyRatio measurement decision risk analysis software from Integrated Sciences Group AccuracyRatio Literature References


Below are listed references that treat the subject of measurement decision risk analysis. Much of the methodology described in these references has been incorporated in AccuracyRatio.

  Caldwell,  D. and Ferling, J.: Analytical Modeling for Electronic Test Equipment Adjustment Policies, Proc. NCSL Workshop & Symposium, Denver, July 1989.

Castrup, H.: Evaluation of Customer and Manufacturer Risk vs Acceptance Test Instrument In-Tolerance Level, Proc. NCSL Workshop & Symposium, Gaithersburg, MD, September 1980.

Castrup, H.: Calibration Requirements Analysis System, Proc. NCSL Workshop & Symposium, Denver, CO, 1989.

Castrup, H.: Practical Methods for Analysis of Uncertainty Propagation, Proc. 38th Annual Instrumentation Symposium, Las Vegas, NV, April 1992.

Castrup, H. et al.: Metrology - Calibration and Measurement Processes Guidelines, NASA Reference Publication 1342, June 1994.

Castrup, H.: Uncertainty Analysis for Risk Management, Proc. Meas. Sci. Conf., Anaheim, CA, January 1995.

Castrup, H.: Analyzing Uncertainty for Risk Management, Proc. ASQC 49th Annual Qual. Congress, Cincinnati, OH, May 1995.

Castrup, H.: Uncertainty Analysis and Parameter Tolerancing, Proc. NCSL Workshop & Symposium, Dallas, TX, July 1995.

Deaver, D.: How to Maintain Your Confidence, Proc. NCSL Workshop & Symposium, Albuquerque, NM, July 1993.

Deaver, D.: Guardbanding with Confidence, Proc. NCSL Workshop & Symposium, Chicago, IL, July - August, 1994.

Deaver, D.: Using Guardbands to Justify TURs Less Than 4:1, Proc. Meas. Sci. Conf., Anaheim, CA, January 1995.

Eagle, A.: A Method for Handling Errors in Testing and Measuring, Industrial Quality Control, pp 10-15, March 1954.

Ferling, J.: The Role of Accuracy Ratios in Test and Measurement Processes, Proc. Meas. Sci. Conf., pp 83-102, Long Beach, January 1984.

Ferling, J.: Uncertainty Analysis of Test and Measurement Processes, Proc. Meas. Sci. Conf., Anaheim, CA, January 1995.

Grubbs, F. and Coon, H.: On Setting Test Limits Relative to Specification Limits, Industrial Quality Control, pp 15-20, March 1954.

Hayes, J.: Technical Memorandum No. 63-106, Factors Affecting Measurement Reliability, U.S. Naval Ordnance Laboratory, Corona, CA, October 1955.

ISO/IEC Guide 25, General Requirements for the Competence of Calibration and Testing Laboratories, 1990.

ISO/TAG 4/WG 3, Guide to the Expression of Uncertainty in Measurement, October 1993.

Kuskey, K., New Capabilities for Analyzing METCAL Technical Decisions, Proc. Meas. Sci. Conf., Long Beach, CA, January 1984.

Navy Metrology Research & Development Program Technical Report, ETS Methodology, Dept. of the Navy, Metrology Engineering Center, NWS, Seal Beach, March 1989.

NCSLI RP-18: Estimation and Evaluation of Measurement Decision Risk, 2014.

NIST Technical Note 1297, Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results, September 1994.

Weber, S. and Hillstrom, A., Economic Model of Calibration Improvements for Automatic Test Equipment, NBS Special Publication 673, April 1984.



  Home  |  Company  |  Products  |  Services  |  Training  |  Updates  |  Freeware  |  Articles  |  Help  |  Links 


Integrated Sciences Group
14608 Casitas Canyon Road Bakersfield, CA 93306
Phone 1-661-872-1683 FAX 1-661-872-3669


Privacy Policy     Return Policy     Shipping Info


Page Updated February 06, 2018